Double Glazing Seal Repairs
If the seals on double glazing windows are broken they can lead to damp and mould. This can cause damage to the frame as well as the walls surrounding it, as well as affecting your health.
Fortunately, most uPVC windows can be repaired using sealing, not replacement. A glazier will usually clean the window frame and glass, apply a new bead of sealant and smooth it.
Water Leaks
Window seals are designed for moisture to stay out of your home. When they begin to wear out, water may get into your windows. Not only is a leaky window irritating but it can also cause expensive damage to the structure of your home. It's important to identify the issue early and have it fixed by a professional before it gets any worse.
Most of the time, the cause of your leaking windows is not the glass itself, but on the frame and sill. A leak in this region is the most frequent indication of a damaged window seal. It could be due to damage to the seal due to weather or aging wear-out caulking, or even a blocked drain resulting in an accumulation of ice or water.
Another common sign of a failing window seal is water appearing in between the panes of double-glazed windows. Although, this isn't as hazardous as a leak since the water doesn't travel long enough to get into your home. It does mean, however that the inert gasses that are encased between your windows have escaped out. This can lower the insulation value of your window.
Condensation between the panes of glass is another common indication of a damaged seal. This could be due to an ineffective window seal or it could be the result of an unforgiving climate in your home or a problem with the glass. The condensation might not just be irritating but it can also cause the development of mildew and mould in your home which can be very difficult and costly to get rid of.
It's time to inspect your double-glazed windows if notice these indications. Repairs or replacements will ensure your home is protected from water leaks, lower energy costs, and even keep out draughts. It's a small cost to provide your family with comfort and safety. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our staff is always ready to help! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken seal for double glazing can allow water into the gap that is used to insulate. This water can cause condensation within the window panes, and could also result in fogging or misting.
If you see condensation in your home you should contact a double glazing repair company. Condensation can be an indication that the vacuum seal installed in the factory has failed and water has gotten into the enclosed space.
Condensation is caused by a number of causes, but most commonly by gaskets, sealants, or insulation in the uPVC frames of the windows. There are a variety of options for double glazing seal repairs however it is essential that the new seals are properly sized in order to ensure the best seal and a snug fit.
Typically gaskets used to seal the gaps between your double-glazed units are constructed from a material such as polyurethane foam. These are designed to be long-lasting but they are susceptible to deterioration in time due to wear and tear and exposure to different temperatures and weather conditions throughout the year.
As time passes the foam may shrink or crack and this creates a gap in the seal, which allows moisture to get into those areas of your double-glazed windows. This can result in condensation and decrease in energy efficiency.
Re-sealing windows is one option to address this issue. However, this is not guaranteed to fix the issue because it could only get rid of the condensation that has formed. It will not address the root issues that cause the double-glazed windows to leak or develop condensation.
A professional who can offer an insurance-backed warranty should replace your windows in full. This means that in the event that the company fails or is shut down, you'll remain covered by the insurance. It's important to note that your replacement windows should have a warranty of at least 10 years.
Misting
As the fall months get closer it's a good idea to make sure that your double glazing seals are in good working order. Worn-out window seals are not just detrimental to the insulation properties of your windows, but could also cause damp, mold and condensation. To prevent further damage to your double-glazed windows and save money on energy bills, it's important to repair any problems as soon as possible.
A typical double-glazed window is made up of two glass panes that are held together by an internal space filled with gas. The sealant layer on the outside fills in the gap between the uPVC frames and the glass. This is vital to ensure the air-tight seal that keeps cold and warm air separate in your home, thereby saving money on your heating bill. Unfortunately, over time these seals may fail due to age or weather conditions, or even poor installation. When this happens the encapsulation formula that makes your double-glazed windows so efficient can begin to degrade.
If seals that are damaged or broken are not repaired they could cause condensation and dampness which can affect your health as as the appearance of your window. Damp and mould not only cause damage to your floors, walls and ceilings, but they also create allergens and irritants in your home that can be harmful to you and your family's health.
One of the most common problems that can arise with your double glazing is misting in between the panes. double glazing repairs near me occurs when moisture gets into the insulated part of your window. This can be difficult to fix without professional double glazing seal repair.
DIY solutions to this issue are available, however we do not recommend them as they could be messy and damage your windows. These methods involve drilling into the glass unit and applying chemicals to remove fog & condensation. This can cause a number problems, such as exposing your windows and units to water damage.
Professional glaziers have the expertise, tools and experience needed to safely reseal your uPVC frames and give you lasting results. In addition they can also provide advice on the best ways to keep your uPVC windows in good shape to avoid future issues.
Draughts
A draft coming from your window is a sign that the sealant has broken down and needs to be replaced or repaired. This will prevent cold air getting into your home, improve efficiency in energy use and lower heating bills and improve comfort levels and temperature control.
It is also important to note that not all draughts come from the window seals themselves but rather from the gap between the frame and bricks. In some instances it may be possible to fix the issue by simply filling the gap with silicone caulk. If this does not work, you'll need to have the seal professionally resealed.
If the sealant around double-glazed windows begins to break down and allows water to infiltrate. This can lead to dampness or even mold. This could cause a negative impact on health and may be damaging to property. It is essential to address any water leaks as soon as you spot them. And if your windows are still covered by a guarantee, it is worth checking with the company that you purchased windows from, as they might pay for the repairs.
The windows themselves are typically covered by a guarantee that can last at least 10 years however some companies offer lifetime warranties, so it's worth looking into this information. If your double glazing is covered by a warranty, you should consider contacting the company you purchased them from as soon as you can and providing them with the details of any issues that you're having. The ideal approach is to do this in person or by mail or email, to ensure that everything is recorded and clear.
It is important to note that draughts are often caused by defective hinges rather than a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can become stiffer over time if they are not regularly oiled. This can create an opening between the frame and the sash and let cold air in. This issue can be resolved by replacing these hinges without affecting window seals.